Removal

2GR-FE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: REMOVAL

REMOVAL

1. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

2. REMOVE ENGINE UNDER COVER ASSEMBLY Removal

3. REMOVE NO. 1 ENGINE UNDER COVER Removal

4. DRAIN ENGINE COOLANT Service and Repair

5. REMOVE COOL AIR INTAKE DUCT SEAL Removal

6. REMOVE BATTERY Removal

7. REMOVE NO. 2 AIR CLEANER INLET Removal

8. REMOVE NO. 1 AIR CLEANER INLET Removal

9. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal

10. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal

11. REMOVE ENGINE COOLANT TEMPERATURE SENSOR






(a) Disconnect the engine coolant temperature sensor connector.
(b) Remove the engine coolant temperature sensor and gasket.