Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2008 >> Highlander 2WD V6-3.5L (2GR-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Variable Valve Timing Actuator Position Sensor >> Service and Repair >> Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal








2GR-FE ENGINE CONTROL SYSTEM: VVT SENSOR: REMOVAL

REMOVAL

1. REMOVE ENGINE UNDER COVER ASSEMBLY Removal

2. REMOVE NO. 1 ENGINE UNDER COVER Removal

3. DRAIN ENGINE COOLANT Service and Repair

4. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH

5. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH

6. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

7. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

8. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY

9. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

10. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal

11. DISCONNECT ENGINE ROOM MAIN WIRE Removal

12. REMOVE NO. 1 SURGE TANK STAY Removal

13. REMOVE THROTTLE BODY BRACKET Removal

14. REMOVE INTAKE AIR SURGE TANK ASSEMBLY Removal

15. SEPARATE HARNESS PROTECTOR Removal

16. REMOVE VVT SENSOR (for Bank 1)
(a) Intake side:





(1) Remove the bolt and VVT sensor.
(b) Exhaust side:





(1) Remove the bolt and VVT sensor.
17. REMOVE VVT SENSOR (for Bank 2)
(a) Intake side:





(1) Remove the bolt and VVT sensor.
(b) Exhaust side:





(1) Remove the bolt and VVT sensor.
pro multis · About Operation CHARM