Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2008 >> Highlander 2WD V6-3.5L (2GR-FE) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Body and Frame >> Power Trunk / Liftgate Control Module >> Testing and Inspection >> Pinout Values and Diagnostic Parameters
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Pinout Values and Diagnostic Parameters








WINDSHIELD / WINDOWGLASS: GLASS HATCH OPENER SYSTEM: TERMINALS OF ECU

TERMINALS OF ECU

1. CHECK MAIN BODY ECU





(a) Disconnect the 1A, 1D and 1F Junction block connectors.
(b) Measure the voltage and resistance between the specified terminals of the wire harness side connectors and body ground.
Standard voltage:






Standard resistance:





If the result is not as specified, there may be a malfunction on the wire harness side.
(c) Reconnect the 1A, 1D and 1F Junction block connectors.
(d) Measure the voltage according to the value(s) in the table below.
Standard voltage:





pro multis · About Operation CHARM