Rod Bearing Cap
Torque: 25 Nm (255 kgf-cm, 18 ft-lbf)
Mark the front side of each connecting cap bolt with paint.
Retighten the cap bolts 90° as shown in the illustration.
Check the painted mark is now at a 90° angle to the front.
Torque: 25 Nm (255 kgf-cm, 18 ft-lbf)
Mark the front side of each connecting cap bolt with paint.
Retighten the cap bolts 90° as shown in the illustration.
Check the painted mark is now at a 90° angle to the front.