DTC 80-10

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: 58-10: Gyro Error

DTC 58-10 - Gyro Error

DTC 80-10 - Gyro Error

DESCRIPTION





INSPECTION PROCEDURE
HINT: After the inspection is completed, clear the DTCs. Reading and Clearing Diagnostic Trouble Codes

PROCEDURE

1. CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE)





(a) Enter the "Navigation Check" mode and select "Vehicle Sensors". Operation Check
(b) Check the gyro voltage.
Standard Voltage:
0.5 to 4.5 V
NG -- REPLACE NAVIGATION ECU
OK -- Continue to next step.
2. CLEAR DTC
(a) Clear the DTC. Reading and Clearing Diagnostic Trouble Codes
NEXT -- Continue to next step.
3. RECHECK DTC
(a) Recheck for DTCs and check if the same trouble code is output.
HINT: If DTCs are output frequently, replace the navigation ECU.

OK:
No DTC is output.
NG -- REPLACE NAVIGATION ECU
OK -- END