Installation

NETWORKING: NETWORK GATEWAY ECU: INSTALLATION

INSTALLATION





1. INSTALL NETWORK GATEWAY ECU
(a) Install the ECU with the nut.
(b) Connect the connector.
2. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL Installation

3. INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH Installation

4. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Installation

5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

6. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH Installation

7. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION Installation

8. INSTALL FRONT DOOR SCUFF PLATE RH Installation

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
10. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.