Installation

AUDIO / VIDEO: RADIO RECEIVER (w/o Multi-display): INSTALLATION

INSTALLATION

1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY Installation

2. INSTALL CLOCK ASSEMBLY Installation

3. INSTALL NO. 1 RADIO BRACKET






(a) Install the bracket with the 3 bolts.
Torque: 3.0 Nm (30 kgf-cm, 26 in-lbf)
4. INSTALL NO. 2 RADIO BRACKET






(a) Install the bracket with the 3 bolts.
Torque: 3.0 Nm (30 kgf-cm, 26 in-lbf)
5. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET
(a) Connect the connectors.






(b) Insert the radio receiver to attach the 10 claws on its backside.
NOTE: When inserting the radio receiver, do not press the knobs on it.





(c) Install the radio receiver with the 2 screws and 2 bolts.
for bolt - Torque: 12 Nm (122 kgf-cm, 8 in-lbf)
6. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

7. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

8. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY Installation

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL