Sound Signal Circuit Between Radio Receiver and Stereo Component Amplifier

AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (w/o Multi-display): Sound Signal Circuit between Radio Receiver and Stereo Component Amplifier

Sound Signal Circuit between Radio Receiver and Stereo Component Amplifier

DESCRIPTION

This circuit sends a sound signal from the radio receiver to the stereo component amplifier.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (RADIO RECEIVER - STEREO COMPONENT AMPLIFIER)





(a) Disconnect the F1 receiver connector.
(b) Disconnect the F18 amplifier connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:






NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE