Installation

AUDIO / VIDEO: REAR SEAT ENTERTAINMENT ECU: INSTALLATION

INSTALLATION

1. INSTALL NO. 2 MULTI-DISPLAY CONTROLLER BRACKET






(a) Set the aligning protrusions of the bracket, labeled A, into the multi-display selector holes.
(b) Install the bracket with the 2 bolts labeled B.
2. INSTALL NO. 3 MULTI-DISPLAY CONTROLLER BRACKET






(a) Set the aligning protrusions of the bracket, labeled A, into the multi-display selector holes.
(b) Install the bracket with the 2 bolts labeled B.
3. INSTALL MULTI-DISPLAY SELECTOR WITH BRACKET






(a) Install the multi-display selector with the 2 bolts.
(b) Connect the connectors.
4. INSTALL FRONT FLOOR CARPET ASSEMBLY
(a) Install the carpet that was pulled back to remove the selector. For further details, refer to the installation procedure Installation.
5. INSTALL FRONT DOOR SCUFF PLATE RH Installation

6. INSTALL COWL SIDE TRIM BOARD RH Installation

7. INSTALL INSTRUMENT SIDE PANEL RH Installation

8. INSTALL FRONT SEAT ASSEMBLY RH
(a) Install the front seat assembly RH Installation.
HINT: Use the same procedures described for the LH side.

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
10. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Installation.