Removal

THEFT DETERRENT / KEYLESS ENTRY: ELECTRICAL KEY OSCILLATOR (for Rear Floor): REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

2. REMOVE REAR NO. 1 SEAT ASSEMBLY LH
(a) Remove the rear No. 1 seat assembly LH Removal.
3. REMOVE REAR NO. 1 SEAT ASSEMBLY RH
(a) Remove the rear No. 1 seat assembly RH Removal.
4. REMOVE REAR NO. 2 SEAT ASSEMBLY LH
(a) Remove the rear No. 2 seat assembly LH Removal.
5. REMOVE REAR NO. 2 SEAT ASSEMBLY RH
(a) Remove the rear No. 2 seat assembly RH Removal.
6. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH
(a) Remove the front quarter trim panel assembly LH Removal.
7. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH
(a) Remove the front quarter trim panel assembly RH Removal.
8. REMOVE REAR NO. 1 SEAT PROTECTOR Removal

9. REMOVE REAR NO. 2 SEAT PROTECTOR Removal

10. REMOVE INDOOR ELECTRICAL KEY OSCILLATOR
(a) Fold back the front floor carpet assembly.






(b) Disconnect the connector.
(c) Detach the 2 claws and remove the electrical key oscillator.