Installation

THEFT DETERRENT / KEYLESS ENTRY: ENTRY LOCK AND UNLOCK SWITCH (for Front): INSTALLATION

INSTALLATION
HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.

1. INSTALL FRONT DOOR HANDLE ASSEMBLY OUTSIDE LH






(a) Install the handle by pushing it in the direction of the arrow in the illustration.






(b) Using a T30 "TORX" socket, install the screw.
(c) Connect the connector.
2. INSTALL FRONT DOOR OUTSIDE HANDLE COVER LH Reassembly

3. INSTALL FRONT DOOR SERVICE HOLE COVER LH Reassembly

4. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH Reassembly

5. INSTALL COURTESY LIGHT ASSEMBLY Installation

6. INSTALL DOOR ASSIST GRIP COVER LH Reassembly

7. INSTALL FRONT DOOR INSIDE HANDLE BEZEL LH Reassembly

8. INSTALL FRONT DOOR ARMREST BASE PANEL ASSEMBLY LH Reassembly

9. INSTALL FRONT LOWER DOOR FRAME BRACKET GARNISH LH Reassembly

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
11. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.