Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2008 >> Landcruiser V8-5.7L (3UR-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Power Steering Pressure Switch >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation








3UR-FE ENGINE CONTROL: POWER STEERING OIL PRESSURE SWITCH: INSTALLATION

INSTALLATION

1. INSTALL POWER STEERING OIL PRESSURE SWITCH
(a) Install a new O-ring to the oil pressure switch.
(b) Apply a light coat of engine oil to the O-ring of the oil pressure switch.
NOTICE:
- When reusing the oil pressure switch, inspect the O-ring.
- If the O-ring has scratches or cuts, replace the oil pressure switch.





(c) Using a 24 mm deep socket wrench, install the oil pressure switch.
Torque: 21 Nm (214 kgf-cm, 15 ft-lbf)
(d) Connect the oil pressure switch connector.
2. INSTALL FAN AND GENERATOR V BELT Installation

3. INSTALL AIR CLEANER ASSEMBLY Installation

4. INSTALL AIR CLEANER HOSE ASSEMBLY Installation

5. ADD POWER STEERING FLUID
6. BLEED POWER STEERING FLUID

7. INSPECT FOR POWER STEERING FLUID LEAK
8. INSTALL FRONT FENDER APRON SEAL FRONT RH Installation

9. INSTALL FRONT WHEEL
10. INSTALL V-BANK COVER SUB-ASSEMBLY Installation

11. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY Installation

12. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

13. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH
pro multis · About Operation CHARM