Reassembly

3UR-FE FUEL: FUEL PUMP: REASSEMBLY

REASSEMBLY
NOTE: Do not disconnect the hoses indicated in the illustration.





1. INSTALL NO. 1 FUEL SUCTION SUPPORT






(a) Attach the 2 claws to the claw holes to install the fuel suction support.
2. INSTALL FUEL MAIN VALVE ASSEMBLY






(a) Apply a light coat of gasoline to 2 new O-rings, and install them onto the fuel main valve.






(b) Install the fuel main valve to the fuel filter.
NOTE: Make sure the O-rings are not cut or pinched during the installation.

3. INSTALL FUEL PUMP






(a) Connect the fuel pump wire harness connector to the fuel pump.






(b) Apply a light coat of gasoline to a new O-ring. Then install the O-ring and spacer to the fuel pump.






(c) Attach the 5 claws to the claw holes and install the fuel pump to the suction plate with filter.
4. INSTALL NO. 1 FUEL SUB-TANK
NOTE: Make sure that the fuel tube passes into the section marked by the circle.









(a) Attach the 3 claws to the claw holes to install the fuel sub-tank.






(b) Attach the 3 claws to the claw holes.






(c) Install the tube part to the sub-tank.
(1) Attach the claw on the end of the tube to the claw hole. Install the tube to the 2 clamps on the sub-tank.
(d) Connect the jet pump to the sub-tank.






(e) Connect the fuel pump connector.
5. INSTALL FUEL SENDER GAUGE ASSEMBLY