Installation

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: STEERING ANGLE SENSOR: INSTALLATION

INSTALLATION

1. INSTALL STEERING ANGLE SENSOR






(a) Align the installation holes on the steering sensor with the pins on the spiral cable.
(b) Attach the 6 claws and install the steering sensor to the spiral cable.
2. INSTALL SPIRAL CABLE SUB-ASSEMBLY Installation

3. INSTALL UPPER STEERING COLUMN COVER Installation

4. INSTALL LOWER STEERING COLUMN COVER Installation

5. ADJUST SPIRAL CABLE Installation

6. INSTALL STEERING WHEEL ASSEMBLY Removal

7. INSTALL STEERING PAD Installation

8. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

9. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
- Reset the Autoaway/Return function setting to the previous condition by changing the customize parameter .

11. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.