Cylinder Head Torque and Sequence

CYLINDER HEAD SUB-ASSEMBLY RH






Step 1:

Torque: 36 Nm (367 kgf-cm, 27 ft-lbf)






Step 2:
Mark each cylinder head bolt head with paint as shown in the illustration.
Tighten the cylinder head bolts 90° in the sequence shown in step 1.

Step 3:
Tighten the cylinder head bolts another 90° in the sequence shown in step 1.
Check that the painting marks are now facing rearward.

CYLINDER HEAD SUB-ASSEMBLY LH







Step 1:

Torque: 36 Nm (367 kgf-cm, 27 ft-lbf)






Step 2:
Mark each cylinder head bolt head with paint as shown in the illustration.
Tighten the cylinder head bolts 90° in the sequence shown in step 1.

Step 3:
Tighten the cylinder head bolts another 90° in the sequence shown in step 1.
Check that the painted marks are now facing rearward.