Removal

3UR-FE BATTERY / CHARGING: GENERATOR: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE V-BANK COVER SUB-ASSEMBLY

3. REMOVE AIR CLEANER HOSE ASSEMBLY

4. REMOVE AIR CLEANER ASSEMBLY

5. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH Removal

6. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH Removal

7. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

8. REMOVE FAN AND GENERATOR V BELT

9. REMOVE FRONT FENDER APRON SEAL FRONT RH

10. DISCONNECT VANE PUMP ASSEMBLY

11. DISCONNECT OIL COOLER PIPE ASSEMBLY

12. REMOVE GENERATOR ASSEMBLY






(a) Disconnect the generator connector.
(b) Remove the terminal cap and nut, and disconnect the generator wire.
(c) Remove the bolt and wire harness bracket from the generator.






(d) Remove the 3 bolts, nut and generator.