Removal

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING ECU: REMOVAL

REMOVAL
NOTICE:
- When replacing the tire pressure warning ECU, read the IDs stored in the old ECU using the Techstream and write them down before removal.
- It is necessary to perform initialization Initialization after registration Registration of the transmitter IDs into the tire pressure warning ECU after the ECU and/or a valve and transmitter has been replaced.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE REAR NO. 2 SEAT ASSEMBLY
(a) Remove the rear No. 2 seat assembly Removal.
3. REMOVE REAR STEP COVER Removal

4. REMOVE REAR DOOR SCUFF PLATE RH Removal

5. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE Removal

6. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK Removal

7. REMOVE REAR SEAT COVER CAP Removal

8. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH Removal

9. REMOVE TIRE PRESSURE WARNING ECU






(a) Detach the clamp and disconnect the ECU connector.
(b) Remove the bolt and ECU.