Removal

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING VALVE: REMOVAL

REMOVAL

1. REMOVE FRONT WHEEL
2. REMOVE REAR WHEEL
3. REMOVE GROUND SPARE TIRE
4. REMOVE TIRE PRESSURE WARNING VALVE AND TRANSMITTER
(a) Remove the valve core and cap, and release the air from the tire.
(b) After ensuring that a sufficient amount of air has been released, remove the nut and washer that are used to secure the tire pressure warning valve and transmitter in place, and drop the tire pressure warning valve and transmitter inside the tire.
HINT: Keep the removed cap, valve core, nut and washer.





(c) Disengage the bead using the shoe of a tire remover.
NOTE: Be careful as the tire pressure warning valve and transmitter may become damaged due to interference between the tire pressure warning valve and transmitter and tire bead.

(d) Remove the bead on the upper side.
(e) Take out the tire pressure warning valve and transmitter from the tire, and remove the bead on the lower side.
(f) Remove the grommet from the tire pressure warning valve and transmitter.
HINT: Do not reuse the grommet.