Removal

JF2A TRANSFER / 4WD / AWD: 4WD CONTROL ECU: REMOVAL

REMOVAL

1. REMOVE NO. 1 INSTRUMENT PANEL FINISH CUSHION

2. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

3. REMOVE FRONT DOOR SCUFF PLATE RH

4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

5. REMOVE COWL SIDE TRIM BOARD RH

6. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY

7. REMOVE NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH

8. REMOVE INSTRUMENT PANEL BOX DOOR KNOB

9. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

10. REMOVE 4WD CONTROL ECU






(a) Disconnect the 2 ECU connectors.
(b) Remove the bolt and ECU.