Installation

JF2A TRANSFER / 4WD / AWD: 4WD CONTROL ECU: INSTALLATION

INSTALLATION

1. INSTALL 4WD CONTROL ECU






(a) Install the ECU with the bolt.
Torque: 13 Nm (127 kgf-cm, 9 ft-lbf)
(b) Connect the 2 ECU connectors.
2. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

3. INSTALL INSTRUMENT PANEL BOX DOOR KNOB

4. INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH

5. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY

6. INSTALL COWL SIDE TRIM BOARD RH

7. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

8. INSTALL FRONT DOOR SCUFF PLATE RH

9. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

10. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION