Power Door Lock Switch: Testing and Inspection

DOOR LOCK: DOOR CONTROL SWITCH:

INSPECTION

1. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY





(a) with Power Window:
Measure the resistance according to the value(s) in the table below.
Standard resistance:





If the result is not as specified, replace the switch.





(b) without Power Window:
Measure the resistance according to the value(s) in the table below.
Standard resistance:





If the result is not as specified, replace the switch.
2. INSPECT DOOR CONTROL SWITCH ASSEMBLY





(a) Passenger's side switch:
Measure the resistance according to the value(s) in the table below.
Standard resistance:





If the result is not as specified, replace the switch.