Removal

AIR CONDITIONING: AIR CONDITIONING PANEL:

COMPONENTS






REMOVAL

1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (Removal)

2. REMOVE COMBINATION SWITCH ASSEMBLY
3. REMOVE AIR CONDITIONING CONTROL ASSEMBLY





(a) Using a screwdriver, open the claw of the cable clamp and disconnect the defroster damper control cable.

- Be careful not to bend the cable wire.
- If the cable wire bends, the air conditioning control assembly operationality becomes worse.

HINT: Tape the screwdriver tip before use.





(b) Release the 2 fitting claws and pull out the air conditioning control assembly, as shown in the illustration.





(c) Using a screwdriver, open the claw of the cable clamp and disconnect the airmix damper control cable.

- Be careful not to bend the cable wire.
- If the cable wire bends, the air conditioning control assembly operationality becomes worse.

HINT: Tape the screwdriver tip before use.

(d) Disconnect the connector and remove the air conditioning control assembly.