Installation

1ZZ-FE STARTING: IGNITION SWITCH:

COMPONENTS









INSTALLATION

1. INSTALL IGNITION OR STARTER SWITCH ASSEMBLY





(a) Install the ignition switch assembly with the 2 screws.





(b) Connect the wire harness to the steering assembly.





(c) Connect the unlock warning switch connector to the ignition switch assembly.





(d) Connect the ignition switch connector and unlock warning switch connector.
2. INSTALL STEERING COLUMN COVER LWR





(a) Install the steering column cover LWR with the 3 screws.
3. CONNECT BATTERY NEGATIVE TERMINAL
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)