Wiper Relay: Testing and Inspection

WIPER AND WASHER: WIPER RELAY:

ON-VEHICLE INSPECTION

1. INSPECT REAR WIPER RELAY ASSEMBLY





(a) Disconnect the rear wiper relay connector.
(b) Measure the voltage according to the values(s) in the table below.
Standard voltage:





(c) Measure the resistance according to the values(s) in the table below.
Standard resistance:









(d) Reconnect the rear wiper relay connector.
(e) Turn the ignition switch to the ON position.
(f) Make sure that the glass hatch is closed.
(g) Measure the voltage according to the values(s) in the table below.
Standard voltage: