Removal

2AZ-FE STARTING: IGNITION SWITCH: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE STEERING COLUMN COVER LOWER

(a) Detach the 4 claws, release the tilt lever and remove the steering column cover lower.
3. REMOVE IGNITION SWITCH ASSEMBLY

(a) Disconnect the ignition switch connector.
(b) Disconnect the ignition key cylinder light connector.