Installation

2GR-FE ENGINE CONTROL SYSTEM: CRANKSHAFT POSITION SENSOR: INSTALLATION

INSTALLATION

1. INSTALL CRANKSHAFT POSITION SENSOR






(a) Apply a coat of engine oil to an O-ring of the sensor.
(b) Install the sensor with the bolt.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
(c) Connect the sensor connector.
2. INSTALL COMPRESSOR WITH PULLEY ASSEMBLY

3. INSTALL FAN AND GENERATOR V BELT Installation

4. INSTALL RADIATOR ASSEMBLY
(a) Install the radiator assembly Installation.
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. CHARGE REFRIGERANT

7. ADD ENGINE COOLANT Service and Repair

8. CHECK FOR LEAKAGE OF REFRIGERANT

9. CHECK FOR ENGINE COOLANT LEAKS Testing and Inspection