Removal

2GR-FE ENGINE CONTROL SYSTEM: KNOCK SENSOR: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE ENGINE ASSEMBLY
(a) Remove the engine Removal.
3. REMOVE INTAKE AIR SURGE TANK ASSEMBLY Removal

4. REMOVE INTAKE MANIFOLD Removal

5. REMOVE KNOCK SENSOR






(a) Disconnect the 2 sensor connectors.
(b) Remove the 2 bolts and 2 sensors.