Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2008 >> Sequoia 2WD V8-4.7L (2UZ-FE) >> Repair and Diagnosis >> Specifications >> Capacity Specifications >> Refrigerant Oil
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Refrigerant Oil

COMPRESSOR OIL
When replacing the compressor with a new one, gradually discharge the refrigerant gas from the service valve. Then drain the following amount of oil from the new compressor before installation, so that the amount of oil contained in it is the same as that in the compressor to be replaced.
HINT: New compressors are filled with sufficient oil for the whole cycle. Therefore, it is necessary to drain residual oil from the condenser and cooling unit.

Standard:
- (The amount of oil inside a new compressor: 190 (+15) cc (6.4 (+0.51) fl.oz.)) - (The amount of oil remaining in the removed compressor) = The amount of oil to be removed when replacing the compressor)
pro multis · About Operation CHARM