Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2008 >> Sequoia 4WD V8-4.7L (2UZ-FE) >> Repair and Diagnosis >> Transmission and Drivetrain >> Transfer Case >> Control Module >> Service and Repair >> Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal








JF3A TRANSFER / 4WD / AWD: 4WD CONTROL ECU: REMOVAL

REMOVAL

1. REMOVE FRONT DOOR SCUFF PLATE RH
(a) Remove the front door scuff plate RH ( Removal).
HINT: Use the same procedures described for the LH side.

2. REMOVE COWL SIDE TRIM BOARD RH
(a) Remove the front door scuff plate RH ( Removal).
HINT: Use the same procedures described for the LH side.

3. REMOVE INSTRUMENT SIDE PANEL RH Removal

4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH Removal

5. REMOVE 4WD CONTROL ECU






(a) Disconnect the 2 4WD control ECU connectors.
(b) Remove the bolt and 4WD control ECU.
pro multis · About Operation CHARM