Keyless Entry Transmitter Battery: Service and Repair

DOOR LOCK: TRANSMITTER BATTERY: REPLACEMENT

REPLACEMENT

1. REMOVE TRANSMITTER BATTERY
NOTE: Special caution should be taken for handling each component as they are precision electronic components.





(a) Using a coin or the equivalent, pry out the transmitter case.
NOTE: Do not forcibly pry out the case.





(b) Remove the battery (lithium battery).
- Do not push the terminals with your finger.
- Prying up the battery (lithium battery) to forcibly remove it will cause deformation of the terminals.
- Do not touch the battery with wet hands. Water may cause unexpected rust.
- Do not touch or move any components inside the transmitter, or it may interfere with the proper operation.

2. INSTALL TRANSMITTER BATTERY






(a) Install a new battery (lithium battery) with the positive (+) side up, as shown in the illustration.
- Be sure that the positive side and the negative side of the transmitter battery are faced correctly.
- Be careful not to bend the electrode of the transmitter battery insertion.
- Be careful that no dust or oil adheres to the transmitter case.

(b) Install the case securely.