Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2008 >> Sienna AWD V6-3.5L (2GR-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Variable Valve Timing Actuator Position Sensor >> Service and Repair >> Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal








2GR-FE ENGINE CONTROL SYSTEM: VVT SENSOR: REMOVAL

REMOVAL

1. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY

2. REMOVE FRONT OUTER COWL TOP PANEL SUB-ASSEMBLY Removal

3. DRAIN ENGINE COOLANT Service and Repair

4. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

5. REMOVE NO. 2 AIR CLEANER INLET Removal

6. REMOVE NO. 1 AIR CLEANER INLET Removal

7. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal

8. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal

9. REMOVE INTAKE AIR SURGE TANK ASSEMBLY Removal

10. REMOVE VVT SENSOR (for Bank 1 Intake Side)






(a) Disconnect the VVT sensor connector.
(b) Remove the bolt and VVT sensor.
11. REMOVE VVT SENSOR (for Bank 1 Exhaust Side)






(a) Disconnect the VVT sensor connector.
(b) Remove the bolt and VVT sensor.
12. REMOVE VVT SENSOR (for Bank 2 Intake Side)






(a) Disconnect the VVT sensor connector.
(b) Remove the bolt and VVT sensor.
13. REMOVE VVT SENSOR (for Bank 2 Exhaust Side)






(a) Disconnect the VVT sensor connector.
(b) Remove the bolt and VVT sensor.
pro multis · About Operation CHARM