Cylinder Head

CYLINDER HEAD

RH

Step 1






Using a 10 mm bi-hexagon wrench, install and uniformly tighten the 8 cylinder head bolts with the plate washers in several steps and in the sequence shown in the illustration.

Torque: 36 Nm (367 kgf-cm, 27 ft-lbf)






Step 2
Mark the cylinder head bolt head with paint as shown in the illustration.

Tighten the cylinder head bolts another 90°.

Step 3
Tighten the cylinder head bolts an additional 90°.

LH

Step 1






Using a 10 mm bi-hexagon wrench, install and uniformly tighten the 8 cylinder head bolts with the plate washers in several steps in the sequence shown in the illustration.

Torque: 36 Nm (367 kgf-cm, 27 ft-lbf)






Step 2
Mark the cylinder head bolt head with paint as shown in the illustration.

Tighten the cylinder head bolts another 90°.

Step 3
Tighten the cylinder head bolts an additional 90°.

Check that the painted mark is now facing rearward.