Installation

2GR-FE STARTING: IGNITION SWITCH: INSTALLATION

INSTALLATION

1. INSTALL IGNITION SWITCH ASSEMBLY






(a) Install the ignition switch with the 2 screws.
(b) Install the ignition switch connector.
2. INSTALL STEERING COLUMN COVER LOWER
(a) Attach the 4 claws to install the steering column cover lower.






(b) Insert the key into the ignition key cylinder and release the steering lock.
(c) Turn the steering wheel counterclockwise and install the screw.






(d) Turn the steering wheel clockwise and install the screw.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL