Installation

LIGHTING: HEADLIGHT DIMMER SWITCH:

INSTALLATION

1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY





(a) Engage the claw while loosening the clamp as shown in the illustration.





(b) Install the headlight dimmer switch assembly with the clamp.
(c) Connect the connector.
2. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY (Installation)

3. INSTALL SPIRAL CABLE WITH STEERING ANGLE SENSOR (Installation)

4. INSTALL STEERING COLUMN COVER
5. INSTALL LOWER STEERING COLUMN COVER (Installation)

6. ADJUST SPIRAL CABLE (Installation)

7. INSTALL STEERING WHEEL ASSEMBLY (Installation)

8. INSPECT STEERING WHEEL CENTER POINT
9. INSTALL STEERING PAD (Installation)

10. INSTALL LOWER NO. 3 STEERING WHEEL COVER (Installation)

11. INSTALL LOWER NO. 2 STEERING WHEEL COVER (Installation)

12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
13. INSPECT STEERING PAD (Installation)

14. INSPECT SRS WARNING LIGHT
(Diagnosis System)
15. PERFORM INITIALIZATION

NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal (Repair Instruction - Initialization).