Installation

TIRE AND WHEEL: TIRE PRESSURE WARNING ECU:

INSTALLATION

1. INSTALL TIRE PRESSURE WARNING ECU





(a) Connect the connector and clamp to the tire pressure warning ECU.
(b) Install the tire pressure warning ECU with the nut.
Torque: 8.5 Nm (87 kgf-cm, 75 in-lbf)
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL RH
3. INSTALL NO. 1 UNDER INSTRUMENT PANEL COVER SUB-ASSEMBLY
4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH (for Coupe)
5. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH (for Convertible)
6. INSTALL FRONT DOOR SCUFF PLATE RH (for Coupe)
7. INSTALL FRONT DOOR SCUFF PLATE RH (for Convertible)
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Repair Instruction - Initialization).

9. REGISTER TRANSMITTER ID
HINT: (Registration).

10. INSPECT TIRE PRESSURE WARNING SYSTEM
HINT: (Test Mode Procedure).

11. INITIALIZE SYSTEM

NOTICE:
- Be sure to register the transmitter IDs of all tires including the grand spare tire in the ECU before initialization.
- Be sure to inflate all tires including the grand spare tire to the proper inflation pressure before initialization.

HINT: (Initialization).