Removal

TIRE AND WHEEL: TIRE PRESSURE WARNING ECU:

REMOVAL

NOTE: Before removing the tire pressure warning ECU, read the registered transmitter IDs of all wheels and write them down to use for re-registration of transmitter IDs (Registration).

1. DISCONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Repair Instruction - Initialization).

2. REMOVE FRONT DOOR SCUFF PLATE RH (for Coupe) (Removal)

3. REMOVE FRONT DOOR SCUFF PLATE RH (for Convertible) (Removal)

4. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH (for Coupe) (Removal)

5. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH (for Convertible) (Removal)

6. REMOVE NO. 1 UNDER INSTRUMENT PANEL COVER SUB-ASSEMBLY (Removal)

7. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH (Removal)

8. REMOVE TIRE PRESSURE WARNING ECU





(a) Remove the nut.
(b) Disconnect the connector and clamp.
(c) Remove the tire pressure warning ECU.