Installation

CRUISE CONTROL MAIN SWITCH:

INSTALLATION

1. INSTALL CRUISE CONTROL MAIN SWITCH





(a) Install the cruise control main switch with the 2 screws and connect the connector.
2. INSTALL STEERING PAD ASSEMBLY (Installation)

3. INSTALL LOWER NO. 3 STEERING WHEEL COVER (Installation)

4. INSTALL LOWER NO. 2 STEERING WHEEL COVER (Installation)

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)
6. INSPECT STEERING PAD ASSEMBLY
7. INSPECT SRS WARNING LIGHT (Diagnosis System)