Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2008 >> Tacoma PreRunner V6-4.0L (1GR-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Coolant Temperature Sensor/Switch (For Computer) >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation








1GR-FE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR:

INSTALLATION





1. INSTALL E.F.I. ENGINE COOLANT TEMPERATURE SENSOR
(a) Using a 19 mm deep socket wrench, install the water temperature sensor with a new gasket.
Torque: 20 Nm (204 kgf-cm, 15 ft-lbf)
(b) Connect the connector.
2. CONNECT FUEL PIPE SUB-ASSEMBLY NO.2 (Installation)

3. INSTALL INTAKE AIR SURGE TANK (Installation)

4. INSTALL AIR CLEANER ASSEMBLY
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)
6. ADD ENGINE COOLANT (Service and Repair)

7. CHECK FOR FUEL LEAKAGE
8. CHECK FOR ENGINE COOLANT LEAKAGE (Service and Repair)

9. INSTALL V-BANK COVER (Installation)
pro multis · About Operation CHARM