Removal

1GR-FE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR:

REMOVAL

1. DISCHARGE FUEL SYSTEM PRESSURE (Technician Safety Information)

2. DRAIN ENGINE COOLANT (Service and Repair)

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
4. REMOVE V-BANK COVER (Removal)

5. REMOVE AIR CLEANER ASSEMBLY (Removal)

6. REMOVE INTAKE AIR SURGE TANK (Removal)

7. DISCONNECT FUEL PIPE SUB-ASSEMBLY NO.2 (Removal)





8. REMOVE ENGINE COOLANT TEMPERATURE SENSOR
(a) Disconnect the connector.
(b) Using a 19 mm deep socket wrench, remove the water temperature sensor and gasket.