Installation

EXTERIOR: FRONT BUMPER: INSTALLATION

INSTALLATION

1. INSTALL FRONT BUMPER ASSEMBLY (w/o Fog Light)





(a) Engage each claw.
(b) Install the front bumper assembly with the 8 screws, 2 clips, 2 radiator grille protectors and bolt.





(c) Install the pin hold clip.
HINT: Use the same procedures for the RH side and LH side.

2. INSTALL FRONT BUMPER ASSEMBLY (w/ Fog Light)





(a) Connect each connector.
(b) Engage each claw.
(c) Install the front bumper assembly with the 8 screws, 2 clips, 2 radiator grille protectors and bolt.





(d) Install the pin hold clip.
HINT: Use the same procedures for the RH side and LH side.

3. INSTALL COOL AIR INTAKE DUCT SEAL (for 2GR-FE)





(a) Install the cool air intake duct seal with the 7 clips.
4. VEHICLE PREPARATION FOR FOG LIGHT AIMING (w/ Fog Light) Adjustments
5. PREPARATION FOR FOG LIGHT AIMING (w/ Fog Light) Adjustments
6. INSPECT FOG LIGHT AIMING (w/ Fog Light) Adjustments
7. ADJUST FOG LIGHT AIMING (w/ Fog Light) Adjustments