Pinout Values and Diagnostic Parameters

AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: TERMINALS OF ECU

TERMINALS OF ECU

1. CHECK RADIO RECEIVER





(a) Disconnect the E41 receiver connector.
(b) Measure the resistance and voltage of the wire harness side connector.

Standard:





HINT: If the results are not as specified, there may be a malfunction in the wire harness.

(c) Reconnect the E41 receiver connector.
(d) Measure the voltage of the connector.

Standard voltage:





*1: w/ Woofer Speaker
HINT: If the results are not as specified, there may be a malfunction in the wire harness.