Installation

AUDIO / VISUAL: STEERING PAD SWITCH: INSTALLATION

INSTALLATION
CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Service Precautions.

1. INSTALL STEERING PAD SWITCH





(a) Engage the 2 claws and the pin and install the steering pad.
(b) Tighten the screw.
Torque: 2.4 Nm (24 kgf-cm, 21 in-lbf)
(c) Connect the connector.
(d) w/ Cruise Control System:
(1) Connect the cruise control switch connector.
2. INSTALL STEERING PAD Installation
3. INSTALL STEERING WHEEL LOWER COVER LH Installation
4. INSTALL STEERING WHEEL LOWER COVER RH Installation
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)
6. INSPECT SRS WARNING LIGHT Diagnosis System