Installation

EXTERIOR: FRONT BUMPER: INSTALLATION

INSTALLATION

1. INSTALL FRONT BUMPER EXTENSION LH





(a) Install the front bumper extension with the 4 nuts.
Torque: 65 Nm (665 kgf-cm, 48 ft-lbf)
2. INSTALL FRONT BUMPER EXTENSION RH
HINT: Use the same procedure as for the LH side.

3. INSTALL FRONT BUMPER REINFORCEMENT





(a) Install the front bumper reinforcement with the 4 nuts.
Torque: 65 Nm (665 kgf-cm, 48 ft-lbf)
4. INSTALL FRONT BUMPER UPPER RETAINER





(a) Engage the 2 hooks and install the front bumper upper retainer.
(b) Tighten the 3 bolts.
Torque: 8.0 Nm (80 kgf-cm, 71 in-lbf)
5. INSTALL FRONT BUMPER FILLER LH





(a) Engage the clip and the 2 claws and install the front bumper filler.
6. INSTALL FRONT BUMPER FILLER RH
HINT: Use the same procedure as for the LH side.

7. INSTALL FRONT BUMPER SIDE SUPPORT LH





(a) Engage the 2 claws and install the front bumper side support.
(b) Tighten the 2 screws.
Torque: 3.0 Nm (30 kgf-cm, 27 in-lbf)
8. INSTALL FRONT BUMPER SIDE SUPPORT RH
HINT: Use the same procedure as for the LH side.

9. INSTALL FRONT BUMPER COVER





(a) Install the 4 clips.





(b) Engage the 2 claws and install the front bumper cover.





(c) Tighten the 8 screws and the 4 bolts.
Torque: 3.0 Nm (30 kgf-cm, 27 in-lbf)
Torque: 8.0 Nm (80 kgf-cm, 71 in-lbf)





(d) Install the 5 clips.





(e) Remove the protective tape.
10. INSTALL RADIATOR GRILLE





(a) Engage the 5 clips and install the radiator grille.
(b) Tighten the 2 screws.
Torque: 3.0 Nm (30 kgf-cm, 27 in-lbf)
(c) Install the 2 clips.