Removal

EXTERIOR: NAME PLATE: REMOVAL

REMOVAL

1. REMOVE NO. 1 BACK DOOR NAME PLATE





(a) Apply protective tape to the back door panel in the area around the No. 1 back door name plate.
(b) Using an infrared light, heat the No. 1 back door name plate.
CAUTION: Do not burn yourself with the heated back door panel or infrared light.
HINT: Heat at 40 to 60°C (104 to 140°F) for 1 to 2 minutes.





(c) Using a gasket scraper with its tip wrapped in protective tape, gradually peel the adhesive surface and remove the No. 1 back door name plate.
(d) Remove the protective tape.
2. REMOVE NO. 2 BACK DOOR NAME PLATE





(a) Apply protective tape to the back door panel in the area around the No. 2 back door name plate.
(b) Using an infrared light, heat the No. 2 back door name plate.
CAUTION: Do not burn yourself with the heated back door panel or infrared light.
HINT: Heat at 40 to 60°C (104 to 140°F) for 1 to 2 minutes.





(c) Using a gasket scraper with its tip wrapped in protective tape, gradually peel the adhesive surface and remove the No. 2 back door name plate.
(d) Remove the protective tape.
3. REMOVE REAR NAME PLATE





(a) Apply protective tape to the back door panel in the area around the rear name plate.
(b) Using an infrared light, heat the rear name plate.
CAUTION: Do not burn yourself with the heated back door panel or infrared light.
HINT: Heat at 40 to 60°C (104 to 140°F) for 1 to 2 minutes.





(c) Using a gasket scraper with its tip wrapped in protective tape, gradually peel the adhesive surface and remove the rear name plate.
(d) Remove the protective tape.