Reassembly

SEAT: REAR SEAT ASSEMBLY (for LH Side): REASSEMBLY

REASSEMBLY
CAUTION: Wear protective gloves. Sharp surfaces on the rear seat cushion frame and the rear seatback frame could cause injuries to your hands.

1. INSTALL REAR SEATBACK COVER





(a) Using hog ring pliers, install the rear seatback cover with 8 new hog rings.

NOTICE :
- Do not soil or scratch the rear seatback cover.
- When installing the hog rings, minimize wrinkles as far as possible.

(b) Pass the hook of the rear seatback cover through the slit in the rear seatback pad.
2. INSTALL REAR SEATBACK LOCK ASSEMBLY





(a) Install the rear seatback lock with the 2 bolts.
Torque: 18 Nm (185 kgf-cm, 13 ft-lbf)
3. INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY





(a) Install the rear seatback frame.





(b) Using hog ring pliers, install 14 new hog rings.
4. INSTALL REAR SEATBACK STOP BUTTON GROMMET





(a) Engage the 2 claws and install the rear seatback stop button grommet.
5. INSTALL REAR SEATBACK LOCK RELEASE BUTTON





(a) Install the rear seatback lock release button.





6. INSTALL REAR SEAT HEADREST SUPPORT
HINT: Use the same procedure for both sides.

(a) Align the protruding portion of the rear seat headrest support with the installation groove of the rear seatback frame.
(b) Engage the 2 claws and install the rear seat headrest support.
7. INSTALL TETHER ANCHOR COVER





(a) Engage the 3 claws and install the tether anchor cover.





(b) Engage the 2 claws and close the cover.
8. INSTALL REAR SEATBACK LOCK COVER





(a) Engage the claw and install the rear seatback lock cover.
(b) Tighten the screw.
9. INSTALL REAR SEAT HEADREST ASSEMBLY





(a) Push the lock button of the rear seat headrest support and install the rear seat headrest.
10. INSTALL REAR SEAT CUSHION COVER





(a) Using hog ring pliers, install the rear seat cushion cover with 10 new hog rings.

NOTICE :
- Do not soil or scratch the rear seat cushion cover.
- When installing the hog rings, minimize wrinkles as far as possible.

11. INSTALL REAR SEAT CUSHION FRAME SUB-ASSEMBLY





(a) Engage the hook and install the rear seat cushion frame.
12. INSTALL REAR SEAT CUSHION STOPPER





(a) Install the rear seat cushion stopper with the screw.
13. INSTALL REAR SEAT CUSHION UNDER COVER





(a) Insert the rear seat cushion stopper into the slit of the rear seat cushion under cover.
(b) Install the rear seat cushion under cover with the 5 clips.
(c) Install the rear seat cushion stopper into the rear seat cushion cover band.





14. INSTALL REAR SEAT CUSHION HINGE SUB-ASSEMBLY
HINT: Use the same procedure for both sides.

(a) Engage the hook and install the rear seat cushion hinge.
(b) Install the rear seat cushion hinge with the bolt.
Torque: 18 Nm (185 kgf-cm, 13 ft-lbf)