Disassembly

BRAKE: REAR BRAKE: DISASSEMBLY

DISASSEMBLY





1. REMOVE CYLINDER BOOT
(a) Using a screwdriver, remove the cylinder boot from the disc brake cylinder.





2. REMOVE REAR DISC BRAKE PISTON
(a) Place a shop rag or piece of cloth between the piston and disc brake cylinder.
(b) Apply compressed air to remove the piston from the disc brake cylinder.
CAUTION: Do not place your fingers in front of the piston when applying compressed air.
NOTE: Do not spatter the brake fluid.





3. REMOVE PISTON SEAL
(a) Using a screwdriver, remove the piston seal from the disc brake cylinder.
NOTE: Do not damage the inner surface or piston seal groove of the cylinder.

4. REMOVE REAR DISC BRAKE BLEEDER PLUG CAP
5. REMOVE REAR DISC BRAKE BLEEDER PLUG