Removal

BRAKE: FRONT BRAKE: REMOVAL

REMOVAL

1. REMOVE FRONT WHEEL
2. DRAIN BRAKE FLUID
NOTE: Immediately wash off any brake fluid that comes into contact with any painted surfaces.





3. REMOVE FRONT DISC BRAKE ANTI RATTLE WITH HOLE PIN
(a) Remove the 2 pin hold clips, then remove the 2 hole pins from the disc brake cylinder.
(b) Remove the anti rattle spring from the disc brake pad.
4. REMOVE FRONT DISC BRAKE PAD
(a) Remove the 2 disc brake pads with anti squeal shims from the disc brake cylinder.
5. REMOVE FRONT ANTI SQUEAL SHIM KIT
(a) Remove the No. 1 and No. 2 anti squeal shims from each of the disc brake pads.
6. REMOVE DISC BRAKE CYLINDER ASSEMBLY





(a) Using a union nut wrench, separate the brake tube from the disc brake cylinder.
HINT: Use a container to collect the brake fluid as it drains out.





(b) Remove the 2 bolts and disc brake cylinder.
7. REMOVE FRONT DISC
(a) Place matchmarks on the disc and the axle hub and remove the disc.