Removal

BRAKE CONTROL: YAW RATE AND DECELERATION SENSOR: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY Removal
3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) Removal
4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD) Removal
5. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY Removal





6. REMOVE YAW RATE AND DECELERATION SENSOR
(a) Disconnect the yaw rate and deceleration sensor connector.
(b) Remove the 2 bolts and remove the yaw rate and deceleration sensor.