Reading and Clearing Diagnostic Trouble Codes

CRUISE CONTROL: CRUISE CONTROL SYSTEM: DTC CHECK / CLEAR

DTC CHECK / CLEAR

1. DTC CHECK
(a) Connect a Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the tester ON.
(d) Enter the following menus: Powertrain / Cruise Control / Trouble Codes.
(e) Read the DTCs.
2. CLEAR DTC
(a) Connect a Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the tester ON.
(d) Enter the following menus: Select: Powertrain / Cruise Control / Trouble Codes.
(e) Erase the DTCs.