Timing Components: Specifications
NO. 1 CHAIN TENSIONER ASSEMBLYTorque 10 Nm (102 kgf-cm, 7.4 ft-lbf)
NO. 2 CHAIN TENSIONER ASSEMBLY
Torque 19 Nm (194 kgf-cm, 14 ft-lbf)
NO. 3 CHAIN TENSIONER ASSEMBLY
Torque 19 Nm (194 kgf-cm, 14 ft-lbf)
CRANKSHAFT PULLEY
Torque 250 Nm (2,549 kgf-cm, 185 ft-lbf)
TIMING CHAIN OR BELT COVER SUB-ASSEMBLY
Install the timing chain cover with the 24 bolts and 2 nuts. Tighten the bolts and nuts uniformly in several steps.
Torque 23 Nm (235 kgf-cm, 17 ft-lbf)
Pay attention not to wrap the chain and slipper over the timing chain cover seal line.
Each bolt length is as follows:
